Brother PT-330 - Manual (Page 72)

TAPE FUNCTION
The Tape function allows you to adjust the size of the margins on the left and right sides of
your text.
The default Tape setting is ####; however, four other settings are also available.
####
(25 mm
margins)
(no margins)
(4 mm
margins)
##
(8 mm
margins)
###
(12 mm
margins)
ABC
ABC
ABC
ABC
ABC
I ® * If an instant-lettering (rub-on) or iron-on tape cassette is installed, the text will be
printed with 1" (25 mm) margins, even if a different Tape setting is selected.
After printing a label using the - Tape setting, hold down and press once
to feed the tape before pushing down on the tape cutter lever to cut it. Otherwise
some of the printed characters may be cut off.
After printing using the #, # # or # # # Tape settings, push down on the tape cutter lever
to cut off the label, then use scissors to cut along the printed dots (:) to center the text
within the label.
To change the Tape setting:
O
Hold down and press ^ once. The currently selected Tape setting appears in
the display.
O Keep CSdQ held down and continue pressing ^ until the desired setting appears in
the display.
O Release to apply the selected Tape setting to the entire text.
69