beautypg.com

Self-cleaning (cont’d), Instructions, Stopping or interrupting a self-cleaning cycle – Kenmore 790.4672 User Manual

Page 40: Adjusting oven temperature, To adjust the oven temperature higher, To adjust the oven temperature lower, Press, Display, L‘3u “30, Adjusting the oven temperature

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Self-Cleaning (cont’d)

INSTRUCTIONS

stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle

due to excessive smoke or fire in the oven;

f. Press {

stop

PRESS

2. Once the oven has cooled down for approximately 1 HOUR

and the "DOOR LOCKED" icon is no longer displayed, the
oven door can then be opened (Figure 1).

Note: Self-Clean cycle can never be set to start more than f 2 hours in advance.

DISPLAY

Figure 1

Adjusting Oven Temperature

The temperature in the oven has been pre-set at the factory. When first using the
oven, be sure to follow recipe times and temperatures. If you think the oven is cooking
too hot or too cool for the temperature you select, you can adjust the actual oven
temperature to be more or less than what is displayed. Before adjusting, test a recipe
by using a temperature setting that is higher or lower than the recommended
temperature. The baking results should help you to decide how much of an adjustment
is needed.

INSTRUCTIONS

To adjust the oven temperature higher

1. Press Bake ; for 6 seconds (Figure 2).

2. To increase the temperature use the number pads to enter the

desired change (Example 30°F)

(Figure 3). The

temperature may be increased as much as 35°F {19°C).

3. Press

'

start

to accept the temperature change and the display

will return to the time of day (Figure 4). Press to reject the

change if necessary.

To adjust the oven temperature lower

f. Press Bake for 6 seconds. 00 Will appear in the display (Figure 5).

2. To decrease the temperature use the number pads to enter the

desired change (Example -30°F)

press (a^

(Figure 6). The temperature may be decreased as much as 35°F
(19°C).

3. Press START i to accept the temperature change and the display

will return to the time of day (Figure 7). Press to reject the

change if necessary.

PRESS

Bake ■

CD®

START ; or (STOP

Bake ,

CD®

START

or

(STOP

Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature.

I

DISPLAY

on n n

■ j u u u

Figure 2

lOn 3n°

l - J U J U

I

Figure 3

:30

I

Figure 4

on nn

■ JU

uu

Figure 5

l‘3u “30

I

Figure 6

•■30

Figure 7

40