Kenmore 790.4672 User Manual
Electric range, Estufa eléctrica
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- Electric Range
- Estufa eléctrica
- Table of Contents
- Kenmore Elite Appliance Warranty
- Read all instructions before using this appliance.
- Save these instructions for future reference.
- IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP
- FOR COOKTOPS WITH COIL ELEMENTS ONLY
- FOR GLASS COOKTOPS ONLY
- IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN
- IMPORTANT INSTRUCTIONS FOR CLEANING YOUR RANGE
- SELF-CLEANING OVENS
- IMPORTANT SAFETY NOTICE
- Table of Contents
- SAVE THESE SAFETY INSTRUCTIONS
- Product Record
- Range features
- Note: The features of your range will vary according to model.
- CORRECT
- INCORRECT
- About the Ceramic Glass Cooktop
- About the Radiant Surface Elements
- Locations of the Radiant Surface Elements and Controls
- The Electronic Surface Element Control (ESEC)
- The available ESEC Window Display Settings
- ESEC Lockout Feature (- -)
- Hot Element Indicator Message (HE)
- Pan Detection Feature
- Error Codes E XX
- Recommended Surface Cooking Settings
- Operating Single Radiant Surface Elements
- To Operate the Single Radiant Surface Elements:
- Operating the Dual Surface Element
- To Operate the Dual Surface Element:
- Operating the Bridge Surface Element
- To Operate the Bridge Surface Element:
- /\ HI
- V' LO
- To Set the Cooktop Lockout Feature Qcooktop
- INSTRUCTIONS
- To turn the Cooktop Lockout Feature OFF:
- How the Electronic Surface Element Controls work when the Sabbath feature is ON.
- To turn ON a Surface Element when the Oven Sabbath Feature is active:
- To turn OFF the Surface Element when the Oven Sabbath Mode is active:
- A CAUTION
- I This range has a fan that will turn “ON” and “OFF” by itself to keep the electronics cool. It may continue to run after the range has been turned “OFF”, but may also stop immediately and then turn “ON” after a while.
- Oven Vent Location
- OVEN VENT
- Removing and Replacing Oven Racks
- Before Setting Oven Controls (cont’d)
- Setting Oven Controls (con’t)
- 30 350
- l:30 315'
- 1:30 PI?E S
- 1*30 3 "Î5 ^
- I .’30 315 LZ
- 1:30 435'D
- 1:30 PPE £
- 1:30 ЧР5'
- ('30 350
- (■30 315
- I .‘30 315 S
- l■•30 3^5■
- l:30 335'
- IS »
- 1:30 315'®
- 1:30 CF ®
- 350’S:
- --;30 35i3'|j[
- ?-'00 End
- i-'30 350
- --■■30
- :30 350'
- i‘30 350
- S'30 350
- 5-00 End
- ■■30 H
- I; 30 Hid
- i*'30 HLd
- 1:30 SRb □
- 1:30 350'
- 1:30 315‘
- l:30 315‘[i;
- IMPORTANT:
- Proper Temperature Probe Placement:
- Setting the Oven When using the Temperature Probe:
- probe can be damaged by very high temperature. To protect the probe against this damage, the oven control will not allow you to start a self-clean or broil while the probe is connected.
- Arranging Warmer (Warm & Ready^“) Drawer Rack Positions
- Operating the Warmer Drawer
- Warmer Drawer Food Temperature Settings
- Warmer (Warm & Ready^"^) Drawer & Proof Bread Indicator Lights
- Setting Warmer Drawer Controls (cont’d)
- Self-Cleaning
- 83--88 888'Œ
- l‘3u “30
- General Care & Cleaning
- General Care & Cleaning (cont’d)
- General Care & Cleaning (cont’d)
- General Care & Cleaning (cont’d)
- Before you call
- Your Home
- Our Home
- 1-800-488-1222 (u S A ) 1-800-469-4663 (Canada)