Kenmore 790.4672 - Manual (Page 20)

Setting Oven Controls (con’t)
Consumer Defined Control Features
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL Broil and FLEX CLEAN P®ds control the Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTIONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1
.
To tell if the display is set for Fahrenheit or Celsius press Broii
(Figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
Press to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C" (Figure
3).
Broil
3. Press START to accept the change or press (^ stopj to reject the
change.
for Tseconds
Figure 1
F
/TiTTN
Figure 2
r
L
START i or
Figure 3
20