Control in jack, Control out jack – Pioneer CT-W505R User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CONNECTING THE POWER CORD (®)

Insert the power cord of the cassette deck into the accessory AC

outlet of your amplifier, or into a normal household outlet.

PIONEER SYSTEM REMOTE CONTROL

(®)

CONTROL IN jack

Use the enclosed Remote Control Cord to connect this jack to the

CONTROL OUT jack of another component which bears the H mark

(indicating that it is equipped with PIONEER System Remote Con

trol). You will then be able to operate this unit using the Pioneer sys

tem remote control unit, if the remote control unit does not have

separate buttons for deck I and deck II, or a selection button to
choose deck I or deck II, the buttons will only operate deck II. To
operate deck I with a remote control unit which was not designed

for double cassette deck, see page 9.

CONTROL OUT jack

Intermediary jack which outputs signals from the CONTROL IN jack

of this unit to the input jack of another unit. Connect this jack to the

CONTROL IN jack of another component compatible with PIONEER
System Remote Control.

NOTE:

Be sure to connect both of the control cord's plugs securely to the
CONTROL IN and CONTROL OUT jacks. Do not connect only one
end of the cable.

CD'DECK SYNCHRO RECORDING

((D)

•

CD»DECK SYNCHRO recording can be carried out when this unit

is connected to a Pioneer CD player equipped with a CD»DECK
SYNCHRO jack.

NOTES:

•

Keep the input and output jacks connected between the amplifier

and this unit, otherwise, the CD»DECK SYNCHRO recording can

not be carried out.

•

Even when the CD player is connected to the amplifier with an

optical fiber cable, connect the CD player to the amplifier or this

unit with the input and output cords that have pin plugs.

m Do not use any cords other than the supplied accessory cord.

(Use only the supplied accessory cord.)

CONNECTING THE RECORDING AND
PLAYBACK CORDS

(

, ® )

Connect the TAPE jacks of your amplifier to the LINE jacks of the
cassette deck. Be sure to connect the REC (INPUT) jacks of the deck

to the recording (output) jacks of the amplifier, and the PLAY (OUT

PUT) jacks of the deck to the play (input) jacks of the amplifier.

• Connect the plugs properly:

Left channel - White plug
Right channel - Red plug