Pioneer CT-W505R - Manual (Page 18)

When troubles occur:
When certain troubles occur during use of the cassette deck, the following display (service number) appears on the function display of the cassette
deck. If this occurs, follow the "Remedy" below.
Function display of the cassette deck
Service Number Cassette deck status Cause Remedy
М3 The DECK 1 tape transport mechanism is
locked up.
The EJECT button was pressed dur­
ing a tape transport operation.
e Remove the cassette tape, then
turn the power back on.
• When requesting service, please
report the service number shown
in the display window.
M4 The DECK 11 tape transport mechanism
is locked up.
The EJECT button was pressed dur­
ing a tape transport operation.
• Remove the cassette tape, then
turn the power back on.
• When requesting service, please
report the service number shovvn
in the display window.
System........................................................... 4-track, 2-channel stereo.
Heads....................... "Hard Permalloy" recording/playback head X 1
"Hard Permalloy" playback head X 1
"Ferrite" erasing head X 1
Motor.......................................................................DC servo motor X 2
Wow and Flutter................... ........................................ 0.09% (WRMS)
±0.19% (DIN)
Fast Winding Time................ Approximately 100 seconds (C-60 tape)
Frequency Response
-20 dB recording:
TYPE IV (Metal) tape.............................................. 20 to 16,500 Hz
TYPE II (High/CrOz) tape........................................20 to 16,000 Hz
TYPE I (Norma!) tape..............................................20 to 16,000 Hz
Signal-to-Noise Ratio
Dolby NR OFE...................................................... More than 57 dB
Noise Reduction Effect
Dolby B-type NR ON............................ More than 10 dB (at 5 kHz)
Dolby C-type NR ON............................ More than 19 dB (at 5 kHz)
Harmonic Distortion................................................No more than 0.8%
(at -4 dB: 160 nwb/m)
Input (Sensitivity)
LINE (INPUT) ............................100 mV (Input impedance 68 ki2)
Output (Reference level)
LINE (OUTPUT).........................0.5 V (Output impedance 1.9 ki2)
Headphones ............................. 1.33 mW (Load impedance 32 Ci)
Weight (without package)
U.S., U.K., Australian models................................. 4.2kg (9 lb 4 oz)
Multi-voltage models............................................... 4.1kg (9 lb 1 oz)
European model....................................................4.0kg (8 lb 13 oz)
Subfunctions
• Automatic reverse
• DOLBY HX PRO system
• DOLBY B/C type NR systems
• Music search up to ±15 selections
• Synchronized copy start
•
High-speed and normal-speed copy (DECK I -► DECK II)
• Relay playback/blank skip
• CD»DECK SYNCHRO recording capability
•
Peak level meter with peak-hold function
• Automatic space recording mute
• Automatic tape selector
• B System remote control available
• 2-mode electronic 4-digit twin tape counter
•
Headphone jack
• FLEX system (Frequency Level Expander)
• TDNS system (Tape Duplication Noise Suppressor)
• ALCA system (Auto Level Control with tape Analysis)
• AUTO BLE system
• LAST MEMORY
Miscellaneous
Power Requirements
U.S.'model..............................................................AC 120 V, 60 Hz
U.K., Australian models........................... AC 230-240 V, 50/60 Hz
Multi-voltage models
...........AC 110/120-127/220/230-240 V (switchable), 50/60 Hz
Power Consumption........................................................................17 W
Dimensions.......................................... 420(W) X 125(H) X 250(D) mm
16-1/2 (W) X 4-15/16 (H) X 9-13/16 (D) in
18
En
Accessories
Operating instructions...........................................................................1
Connection cord with pin plugs............................................................. 2
^ Remote control cord...........................................................................1
CD«DECK SYNCHRO control cord'.....................................................1
NOTE:
Specifications and design subject to possible modifications without
notice, due to improvements.