Phone lock setting, Lock phone now – Casio G'zOne Ravine User Manual
Page 159
158
SETTINGS & TOOLS
Messages: Incoming Messages/Outgoing Messages
For Incoming Messages, set Allow All/Block All.
For Outgoing Messages, set Allow All/Block All.
Dial-Up Modem: Allow/Block
To set any of the options, press the Center Select Key [SET].
Phone Lock Setting
This setting is used to lock the handset and restrict its functionality to
prevent your handset from the unauthorized use until the Lock Code is
entered. Once set, the handset will enter Lock Mode upon powering
on after powering off once. When in Lock Mode, you can only receive
a phone call, make a 911 call, or call an (In Case of Emergency) ICE
contact. You can change the Lock Code using the Security menu.
1.
From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Phone Settings, Security.
2.
Enter the four-digit Lock Code. The default Lock Code is the last 4
digits of your phone number.
3.
Press
Phone Lock Setting.
4.
Select one of the following settings, then press the Center Select
Key [SET].
Unlocked: Your handset will not be locked when it is turned on.
On Power Up: Your handset will be locked when it is turned on.
Lock Phone Now
1.
From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Phone Settings, Security.
2.
Enter the four-digit Lock Code. The default Lock Code is the last 4
digits of your phone number.
3.
Press
Lock Phone Now.
I
I