Grounding instructions, Important safety notice, Serial – Kenmore 790.75604 User Manual
Page 5: Plate, Location, Important safety instructions, Serial plate location
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Important Safety Instructions
Grounding type
wall receptacle
Do not, under any
circumstance, cut,
remove, or bypass
the grounding prong.
GROUNDING INSTRUCTIONS
(electric ignition models only)
WARNING
I Avoid fire hazard or electrical shock. Do not use an
adapter plug, an extension cord, or remove grounding prong from
electrical power cord. Failure to follow this warning can cause
serious injury, fire or death.
Power supply cord
with 3-prong
grounding plug
See the
INSTALLATION INSTRUCTIONS
packaged with this
range for complete installation and grounding instructions.
WARNING
I
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle.
DO NOT
cut or remove
the grounding prong from this plug.
For persona! safety, the range must be properly grounded. For
maximum safety, the power cord must be plugged into an electrical
outlet that is correctly polarized and properly grounded.
If a 2-prong wall receptacle is the only available outlet, it is the
persona! responsibility of the consumer to have it replaced with a
properly grounded 3-prong wall receptacle installed by a qualified
electrician.
IMPORTANT SAFETY NOTICE
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known
to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure
to such substances.
SERIAL
PLATE
LOCATION
You will find the model and serial number
printed on an serial plate. The serial plate is
located on the right side of the oven front
frame in the storage or warmer drawer
compartment.
Please see the illustration for exact location.
Remeber to record the serial number for
future reference (See page 2, under Product
Record).
Serial plate location:
Open the storage or warmer drawer,
located on right side of range frame.