To set or change the temperature for baking, To set control for oven lockout, Setting oven controls – Kenmore 790.75604 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (65°C to 287°C).
To Set the Controls for Baking:
1. Press . "--------------------------" appears in the display.
2. Within 5 seconds, press the -/v
or "V
. The dispiay will show "350°F (177°C)." By pressing and holding the
or
■V
, the temperature can then be adjusted In 5°F (1°C) increments.
3. As soon as the
or "V
is released, the oven will begin heating to the selected temperature. When the displayed
temperature reaches the desired baking temperature, the control will beep 3 times.
4. To cancel the baking function, press
To Change the Oven Temperature after Baking has Started:
1. Press and make sure the bake temperature is displayed.
2. Press the
or "V
to increase or decrease the set temperature.
To Set Control for Continuous Bake or 12 Hour Energy Saving
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than
11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control for continuous baking:
1. Press , “0:00” will appear in the display.
2. Press and hold down for 5 seconds until tone is heard, “--------------------hr” will appear in dispiay for continuous cooking. The
current time of day will return to the dispiay.
3. Tocancel the Continuous Bake function, press
and hold for 5 seconds until tone is heard. “12hr” will appear in display
indicating that the control has returned to the 12 Hour Energy Saving feature.
To Set Control for Oven Lockout:
The control can be programmed to lock the oven door and inactivate the oven controls.
To set Control for Oven Lockout feature:
1. Press [c^] and hold for 3 seconds. “Loc” will appear in dispiay, the “Door Locked” indicator light will flash and the motor
driven door lock will begin to close automatically.
DO NOT open oven door
while the indicator light is flashing. Allowabout
15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the display.
2. Tocancel the lockoutfeature, press
and hold for 3 seconds. The control will unlock the oven doorand resume normal
operation.
Note: If any control pad is pressed while in the Oven Lockout mode, “Loc” will appear in the display until the control
pad is released. Ì.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.V.;
Setting Oven Controls
11