Kenmore ELITE 141.16681 - Manual (Page 10)

Assembly Instructions
Figure 1
CAUTION : While it is possible for one person to
assemble this griil, obtain assistance from another
person when handling some of the larger, heavier
pieces.
1. Open the parts boxes. Use the parts list to check
that all parts have been included.
LEFT SIDE SHELF
2
.
Inspect the griil for damage as you assemble it. Do
not assemble or operate the grill if it appears
damaged, if there are damaged or missing parts
when you unpack the shipping box, or you have
questions during the assembly process, call:
1-888-317-7642
8 a.m. - 8 p.m CST, Mon. Fri.
Installing Side Shelf and Cart Side Handle
1. Remove the \A^ite protective film from the
stainless steel Side Shelf.
2. Enlisting the aid of an assistant, attach Side
Sheif to left side of griil. Align the holes on Side
Shelf with the threaded holes on left Outside Bowi
Panel. Tighten securely using 4 of the 1/4"x3/4"
Phillips Screws provided. See Figure 1.
S122G04121 Qty. 4
Phillips Head Screw 1/4"x3/4"
.WWW'
Enlisting the aid of an assistant, attach Cart Side
Handle to right side of griil. Align the holes on
Cart Side Handle with the threaded holes on
right Outside Bowi Panel. Tighten securely using
4 of the 1/4"x3/4" Flat Head Screws provided.
See Figure 2.
S142G04121 Qty. 4
Countersink Flat Head Screw
1/4"x3/4"
Figure 3
ignition Battery installation - See Figure 3
1. Remove the Ignitor Cap located on the grill
Control Panel.
2. Place the supplied AA battery into the Ignitor
Slot. Be sure to place the positive pole facing
toward you. See Figure 3.
3. Place the Cap and Spring over the AA battery
then tighten the Ignitor Cap onto the grill
Control Panel.
IMPORTANT: Remove any protective film
from outside and inside of Grill Head.
Before use of this grill please refer to
Cleaning Exterior Stainless Steel Surfaces
found on page 18 of this Owner's Manual.
10