Vacuuming tips, Caution, Warning – Kenmore POWER-MATE 116.24614 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VACUUMING TIPS
Suggested sweeping pattern.
For best cleaning action, the Power-Mate'*
should be pushed straight away from you
and pulled straight back. At the end of each
pull stroke, the direction of the Power-Mate®
should be changed to point into the next
section to be cleaned. This pattern should
be continued across the carpet with slow,
gliding motions.
NOTE;
Fast,
jerky strokes do
not provide
complete clean
ing.
The hose swivel
allows the hose to
turn without moving
the canister. This is
helpful for cleaning in
small areas. Check
hose for twisting
before pulling canister.
A
CAUTION
Product Damage Hazard
Use care if the Power-Mate*" and
wand is left in the upright position as
it may tip over easily. Property
damage can occur if tipped.
A
WARNING
Personal injury and Product Damage
Hazard
• DO NOT run over power cord with
Power-Mate*. Personal injury or
damage could result.
• DO NOT pull plug from wall by
the power cord. If there is damage
to the cord or plug, personal injury
or property damage could result.
Suction
Control
Carpeted stairs
need to be
vacuumed
regularly. For
best cleaning
results, fully
close the suction
control.
A
WARNING
Personal Injury Hazard
Use care if canister is placed on
stairs. If it falls, personal injury
or property damage could result.
A
CAUTION
Product Damage Hazard
Do not pull on the hose to move the
canister from one stair to the next.
When finished cleaning in one area
use the handle grip on the canister to
move the vacuum to a new location
for further cleaning.
The stair grip located
on the caster will aid
in preventing the
canister from
slipping when used
on stairs (see
PERFORMANCE
FEATURES).
NOTE: Be sure the canister is resting
securely on the stairs and the caster is in a
locked position before using.
For best cleaning results, keep the airflow
passage open. Check each assembly area
in HOW YOUR VACUUM WORKS
occasionally forelegs. Unplug from outlet
before checking.