Suggested pile height settings, Attachments, Caution – Kenmore POWER-MATE 116.24614 User Manual
Page 10: Attachments on handle, Attachments on wands
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SUGGESTED PILE HEIGHT SETTINGS
For best deep down cleaning, use the XLO
setting. However, you may need to raise the
height to make some jobs easier, such as
scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from
shutting off. Suggested settings are:
HI - Shag, deep pile, or scatter rugs.
MED - Medium to deep pile.
LO - Low to medium pile.
XLO - Most carpets and bare floors.
ATTACHMENTS
A
CAUTION
DO NOT attach or remove handle or
wands while cleaner is ON. This
could cause sparking and damage
the electrical contacts.
ATTACHMENTS ON HANDLE
V
NOTE: If the
Power-Mate® is
attached, turn
cleaner off
before remov
ing handle
from wand.
1. Press han
dle quick
release button
and pull up on
handle.
Lock
Button
Handle
Quick
Release—*^.
Upper
Wand-
NOTE:
To assemble
dusting brush,
insert the febric
brush into the
dusting brush
nozzle and press
into place
2. Slide attachments
firmly on handle as
needed. See ATTACH
MENT USE CHART.
Dusting
Brush
To remove,
press latch
and lift out.
ATTACHMENTS ON WANDS
I.To
remove
wands from
Power
Mate®, lock
wand in
straight-up
position.
Wand
Quick
Release
Pedal
2
.
Press wand quick
release pedal with foot
and puli the wand
straight up and out of
Power-Mate®.
3. Put attach
ments on
wands as
needed. See
ATTACHMENT
USE CHART.
10