Assembly instructions, Warning, Wand -telescoping – Kenmore POWER-MATE 116.24614 User Manual
Page 6: Assembly instructions -7, Power-mate
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY INSTRUCTIONS
A
WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply
until assembly is complete. Failure
to do so could result in electrical
shock or injury.
Before assembling vacuum, check the
PACKING LIST on the cover of the separate
Repair Parts List. Use this list to verify that
you have received ail the components of
your new Kenmore vacuum.
WAND -TELESCOPING
The wand length
is adjustable
and requires no
assembly. To
adjust, simply
push down on
the wand adjust
button and slide
the upper wand
to the desired
height.
Wand
Swivel
The swivel,
located on the
Power-Mate*,
allows you to
turn the handle
to the left side to
reach farther
under low furni
ture.
When adjusting the wand length you may
have to hold the Power-Mate* with your hand
or foot.
POWER-MATE®
Insert wand into Power-Mate* until the wand
button snaps into place.