Exhaust filter changing, Warning, Fire and/or electrical shock hazard – Kenmore POWER-MATE 116.24614 User Manual

Page 15: Exhaust filter hepa

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EXHAUST FILTER CHANGING

WARNING

Fire and/or Electrical Shock Hazard

Do not operate with a clogged

exhaust filter or without the exhaust
filter or exhaust filter cover installed.

EXHAUST FILTER
HEPA

The exhaust filter cartridge must be

replaced when dirty. Replace the filter when

the entire surface area is covered evenly.

The filter CANNOT be washed as it will

lose its dust trapping ability.

NOTE:

See PARTS AND FEATURES for

exhaust filter number.

1. Pull out and
up on the
exhaust filter

cover to remove

from the vacu
um and lay
aside.

Exhaust
Filter

2. Pull the exhaust
filter up and out
from the rear of
the vacuum.

3. Replace the
exhaust filter
cartridge.

Place the new

filter into the
vacuum with
the

foam seat

facing
towards the

vacuum.

Exhaust
Filter

Tabs

4. Replace the
exhaust filter
cover by placing
the two tabs on
the filter cover
into the slots on
the vacuum and
rotate into place
until it snaps
closed.