Kenmore 99721 - Manual (Page 6)

INSTALLATION
Install your oven by following these four simple steps:
Step 1: Remove all packing material and accessories.
Step 2: Place the oven in the level location of your choice, but make sure there is at least one inch of
space on the top and at the rear to make sure of proper ventilation.
Top of the oven should be kept clear and the plastic feet must be kept on oven so there is air flow
for ventilation. An exhaust outlet is at the rear of the oven and blocking the outlet can damage
the oven.
Step 3: Plug your oven into a standard 120 volt household outlet. Be sure the electrical circuit is at least
15 amperes and that your microwave oven is the only appliance on the circuit.
Step 4; To set Time of Day, touch CLEAR; then touch TIME OF DAY; touch numbers for correct time
then touch TIME OF DAY. '
tf you want to build-in this microwave oven, either by itself or over Sears Kenmore electric
built-in oven models 42209, 4228X, 4238X, 42489, and 4258X, {X may be 2 4 6 8 or 9)
Sears Kenmore Built-in Trim Kit Model 22-40191 is available, Contact your nearest Sears store
or the catalog.
Note: