Whole meal cooking, Delay start cooking, See cookbook for detailed explanation) – Kenmore 99721 User Manual
Page 21: Metal rack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WHOLE MEAL COOKING
1_1D 0
1
JLIL2JI[^
^imcriì
9. Touch START. The first
stage will begin. 'TOO" will
show in the Display Window.
The Oven will begin cooking
at 50 (SIMMER) and the time
will be counting down in the
Display Window. When the
7 minutes are up. a tone will
sound and the Oven will
change itself into the
second stage. The Oven will
begin cooking at Hi. When the
3 minutes are up. a tone will
sound and the Oven will shut
itself off. The Oven has finished
both stages.
Note: When Temperature Control
Cooking is set in the second stage,
the Oven will switch into Hold Warm
after cooking. The Hold Warm will
continue for 60 minutes after the food
reaches the chosen temperature, or until
the Door is opened or STOP is touched.
DELAY START COOKING
Delayed cooking can be done by using the TWO-STAGE
COOKING feature. After counting down the preset delay
time, the oven will cook for the chosen cooking time.
(See Cookbook for detailed explanation)
Whole Meal Cooking lets you cook two or more different foods
at the same time. Foods need not be placed in the Oven at the
same time, nor be removed at the same time, unless needed By
using PAUSE rather than MEMORY/RECALL.the Oven will
stop between stages for time to add or remove food.
1. Place the Metal Rack in the Oven. Be sure the shelf
bracings are on the top as shown below. The Rack is
generally placed in top guides but may be set lower
to accomodate a higher cooking utensil, if desired.
2. Place food into the Oven.
3. Set the Oven following the instructions given
in the cookbook.
1. Touch CLEAR.
2. Touch TIME.
3. Touch numbers for Delay Time.
4. Touch COOK CONTROL.
5. Touch “0” (0% of cooking power).
6
.
Touch MEMORY/RECALL.
7. Touch TIME or TEMP CONTROL.
8
.
Touch numbers for Cooking Time or Temperature
9. Touch COOK CONTROL.
10. Touch numbers for Cooking Power level,
11. Touch START.
METAL RACK
B Remove Metal Rack from Oven when not being used for
cooking.
B
Do not use the Oven empty with the Metal Rack in it.
B
The Metal Rack may get hot during cooking. Pot holders
may be needed to remove Rack after cooking.
B
Do not use browning dishes on Metal Rack.
Metal Rack
21