Materials and basic tools needed, Materials needed, Basic tools – Kenmore THE ECONOMIZER 153.33298 User Manual
Page 7: Materiais needed basic tools
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Materials and Basic Tools Needed
Materials Needed
To simplify the installation Sears has available the installation
parts shown below. You may or may not need all of these materi-
ais, depending on your type of installation.
EXPANSION TANKS POR
THERMAL EXPANSION
CONDITIONS AVAILABLE IN
2 GALLON AND 5 GALLON
CAPACITY THROUGH
LOCAL SEARS STORE OR
SERVICE CENTERS
WATER HEATER INSTALLATION
KIT WITH FLEXIBLE
CONNECTORS FOR 3M"OR 1/2"
THREADED OR COPPER
PLUMBING AND FLEXIBLE GAS
CONNECTOR WITH FITTINGS
WATER HEATER STAND 24"x24"x!8"
FOR USE WITH WATER HEATERS
INSTALLED IN RESIDENTIAL
GARAGES HAVING A DIAMETER 24"
OR LESS AND A RATED CAPACITY 7S
GALLONS OR LESS
DRAIN PANS ARE AVAILABLE IN 20",
22", 24" AND 28" DIAMETERS. SELECT A
DRAIN PAN THAT IS AT LEAST 2"
LARGER THAN THE DIAMETER OF THE
WATER HEATER.
Basic Tools
You may or may not need all of these tools, depending on your
type of installation. These tools can be purchased at your local
Sears store.
• Pipe Wrenches (2) 14 "
• Screwdriver
• Tin Snips
• 6 Foot Tape or Folding Rule
• Garden Hose
• Drill
• Pipe dope or Teflon Tape
GARDEN HOSE
6 FOOT TAPE
SLOT-HEAD SCREWDRIVER
*...... ^PHILLIPS SCREWDRIVER
PIPE
WRENCH
TIN SNIPS
4
r - I UpPt
,
is........■ »„i.iiiab,
ROLL OF TEFLON TAPE
(USE ONLY ON WATER
CONNECTIONS)
PIPE DOPE (SQUEEZE TUBE)
(USE FOR WATER AND
GAS CONNECTIONS)
ADDITIONAL
TOOLS
NEEDED
WHEN SWEAT SOLDERING
• Tubing Cutters or Hacksaw
• Propane Torch
• Soft Solder
• Solder Flux
• Emery Cloth
• Wire Brushes
3/4" WIRE BRUSH
i/2" WIRE BRUSH
ROLL OF LEAD FREE
SOFT SOLDER
PROPANE
TORCH
Я
ROLL OF EMERY
CLOTH
SOLDER FLUX
TUBING
(;;gXTER