Installation instructions (cont’d) – Kenmore THE ECONOMIZER 153.33298 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation Instructions (cont’d)
ALL MODELS — VENTING THROUGH WALL
OPTIONAL r VENT PIPING
2" DIA.VENT
MAX. LENGTH fFT.)
NUMBER OF 90° DEG.
ELBOWS*
50
1
45
2
40
3
35
4
30
5
25
6
' NOTE: Two 45° elbows are equivalent to one 90° elbow.
One 90° elbow equals 5 feet of equivalent vent length.
ALL MODELS (3 " VENT)
See tables for max> length.
1. Tbe total vertical and horizontal vent run cannot exceed the
maximum
length with the number of 90° elbow as specified
in the following tables. If more elbows are required, the vent
ing distance must be reduced 5 feet for every 90° elbow:
2. Minimum vent length for all models is 4 feet.
ALL MODELS — VENTING THROUGH WALL
3 " DIA.VENT
NUMBER OF 90° DEG.
MAX. LENGTH fFT.)
ELBOWS*
1 15
1
110
2
105
3
100
4
95
5
90
6
19