Wiring (cont’d), Use without power cord (cont’d), Wiring diagram – Kenmore THE ECONOMIZER 153.33298 User Manual
Page 16: A caution, Installation instructions (cont’d)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Wiring (cont’d)
USE WITHOUT POWER CORD (cont’d)
Installation Instructions (cont’d)
3- A standard
'A"
conduit opening has been made in the water
heater junction box for the conduit connection.
4. Use wire nuts and connect the power supply wiring to the
wires inside the water heaters junction box.
5- The water heater must be electrically “grounded” by the
installer. The unit will not operate unless it is properly
grounded. A green ground screw has been provided on the
water heater’s junction box. Connect ground wire to this
location. For complete grounding details and all allowable
exceptions, refer to the current edition of the National
Electrical CodeANSl/NFPA70.
6. Replace the wiring junction cover using the screw provided.
WIRING DIAGRAM
INDICATED BY BOXED NUMERALS
A CAUTION
Label all wires prior to disconnection when servicing
controls.
Wiring
errors
can
cause
improper
and
dangerous
operation.
Verify
proper
operation
after
servicing.
16