Kenmore 790.9911. - Manual (Page 22)

Setting Oven
Controls
FEATURE
OVERVIEW
• Bake
S tart
T imed O ven
O ven C ook S tart
T ime T ime
fiiiiu SERVE CLEAN
88:88 IMl 888
TIMED DELAY TIMER n CONV BAKE BROIL
DOOR LOCKED CLEAN Q MEATS CAKES BREADS
CONV R roii PRE
BAKE liROn- HEAT
1
4
OVEN KITCHEN
O w O ff O n /O ff
MEATS 1 C akes breads
2
5
/ a ................ .
: dot
I« 0
STOP
C lear
Setting Bake
The BAKE pad controls normal baking. If preheating is necessary, refer to the PREHEAT (^ heat ^ feature for
instructions. The oven can be programmed to bake at any temperature from 170°F to 550°F (The sample shown below
is for 350° F).
INSTRUCTIONS
To set the Bake Temperature to
1. Arrange interior oven racks and place food in oven.
2. Press "----- will appear in the display (Fig. 1).
3. Press (2) (Fig. 2). "BAKE" will flash and
"350°" will appear in the display.
4. Press A long beep will sound once the oven
temperature reaches 350° F and the display will show "350°"
and "BAKE" (Fig. 3).
Pressing wiii cancel the Bake feature at any time.
To change the Bake Temperature (example changing
from 350° to 425°F):
1. After the oven has already been set to bake at 350°F and the
oven temperature needs to be changed to 425°F, press ( ba ^
(Fig. 4) and "------- ° " will show in the display.
2. Press (T) (2) (Fig. 5). "BAKE" flashes and
"425°" will appear in the display.
3. Press "BAKE" and "425°" wiii appear in the display
(See Fig. 6).
Note: If the oven was recently heated from prior cooking and
has remaining heat, the bake element symbol may not show
in the display immediately.
PRESS
CD CD®
DISPLAY
I
I
:30
Fig.l
:30 350'
Fig. 2
l.■30□350■
Fig.3
l:30D — ■
BAKE
® ® ®
1:30
W ?5‘
BAKE
<0)
i:30Dwa5’
Fig. 6
22