Check list of all step-by-step guides to install – Kenmore 625.34846 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 1

WATER SOFTENER START-UP

1B.

CHECK LIST OF ALL STEP-BY-STEP GUIDES TO INSTALL

Refer to the Installation Manual, part no.

7141417, for step-by-step guides.

To be sure you have done all the steps to install

the softener, read tile following list. Page num
bers referred to are in the Installation Manual.

✓

is the house water flow going INTO the soft

ener valve INLET? Trace piping to be sure...
pages 10 and 11.

✓

Is the plumbing bypass valve (or 3 valves) set

for SERVlCE?...page 18.

✓

Is the valve drain hose connected the right

way, and without sharp bends or kinks that
could stop or reduce water flow?...page 16.

✓

Is the softener power cable connected to the

transfomiier...and is the transformer plugged

into an inside. 120V-60Hz electrical outlet...
page20I

✓ Be sure to restart tiie water heater...page 20.

-tu