Dimensions/specifications, Bypass valves, Timer sc code sc21 – Kenmore 625.34846 User Manual
Page 18: Other things to know 4a. dimensions/specifications
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 4
OTHER THINGS TO KNOW
4A.
DIMENSIONS/SPECIFICATIONS
FIG. 12
BYPASS VALVES
MODEL NO. 625.348460
NOTE:
TIMER SC CODE SC21
Please see the rating decaf for water softener operating capacity, salt usage and service flow rate/pres-
sure loss performance specifications. Performance specifications are validated by the Water Quality
Association (WQA). The rating decal is located on the rim, under the salt hole cover (see page 28).
WATER SUPPLY TO WATER SOFTENER
MINIMUM WATER SYSTEM FLOW (gpm)
3
MINIMUM-MAXIMUM
WATER
PRESSURE
(psD
20-120
MAXIMUM WATER TEMPERATURE (*F)
120
MAXIMUM WATER HARDNESS
(gpg)
70*
MAXMUM “CLEAR WATER* IRON
(ppm)
10
SALT FOR WATER SOFTENER
TYPE OF SALT NEEDED
Nugge^ellet
ALTERNATE TYPE OF SALT Pure, evaporated, compacted
..
water softener salt
STORAGE CAPACrrY (pounds)
125
*Do not exceed this number when setting hardness in step 2,
page 7. The maidmum seHing available is 95.
OTHERS
TYPE OF ION EXCHANGE MATERIAL (resin) High Capacity
AMOUNT OF RESiN (cu.fL)
.60
REGENERATION (RECHARGE) CYCLE TIME (min.)
FILL
1-5
BRINING/BRINE RINSE
28
BACKWASH
1
FAST RINSE
1
TOTAL REGENERATION TIME
31-35
gpm s gallons per minute
gpg - grains per gallon
psi s pourxls per square inch
ppm - parts per milOon
18