Telescoping wand with suction control slide, To operate suction control slide, Caution – Kenmore 116.31913 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sw/ve?
Wose
Cffp
The attached
hose swiveis to
make cleaning
easier in every
direction.
Remove the
hose from the
hose clip by
pulling straight
out
TELESCOPING WAND WITH
SUCTION CONTROL SLIDE
SOME MODELS
Crewce
Too/
Wand
Remove the
telescoping
wand from
its storage
position.
Remove the crevice tool from its storage
position in the wand. Turn the locking ring to
the
UNLOCK
position.
Extend the wand to its full length. Turn the
locking ring to the
LOCK
position. Attach
the extension wand onto the open end of
the hose
Lower
Smiion
Control Slide
^ Wand
Lacking Ring
sJJnlack
——— Upper
Wand
Align the tabs on the extension wand with
the "J*’ slots in the hose. Push the wand into
the hose and twist to the right to lock.
To achieve maximum reach
with the attachments, add the
crevice tool to the end of the
wand by inserting and
twisting slightly.
Suction
Control
slide
Telescoping^^
Crevice
Tool
When using the dusting brush or the combi
nation brush, they may be attached directly
to the wand or placed on the end of the
crevice tool.
:r
i
1-
Dusting Brusk CrewceTooi
(Some Models)
1
— Combination
Brush (Some
Models)
TJ
r
Brush
TO OPERATE SUCTION CON
TROL SLIDE
Telescoping Wand
When using attachments for cleaning
draperies, small rugs with !ow pile and other
delicate items, twist the suction control slide
to the open position. This lever is located on
the telescoping wand, close to the hose.
This will reduce suction for ease of cleaning,
\
Note:
Return
suction control
slide to the closed
position for
normal cleaning
Suction
Control
Slide
A
CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching.Trying to reach
beyond the hose stretch capability
could cause the cleaner to tip over.