Seif-cleaning, Instructions, When the self-clean cycle is done – Kenmore 790.9446 User Manual
Page 33: Press, Display, 30 hob, Stopping or interrupting a seif-cleaning cycle
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Seif-Cleaning
•
Setting Flex Clean
•
Setting Delay Flex Clean
INSTRUCTIONS
When
the
Self-Clean cycle is done:
1
. The time of day,
"Hot, DOOR LOCKED and "CLEAN" icon will
remain in the display (See Fig. 7).
2.
Once the oven has cooled down for approximately 1 HOUR, and
the
"DOOR LOCKED" icon is no longer displayed, the oven
doorcan then be opened.
PRESS
DISPLAY
30 Hob
Fig.7
Stopping or Interrupting
a
Seif-Cleaning cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1. Press (^.
2.
Once the oven has cooled down for approximately 1 HOUR and
the
"DOOR LOCKED" icon is no longer displayed,the oven door
can then be opened (Fig.
8
).
Fig.8
ffl
IMPORTANT NOTES when using the Self-Clean feature:
1
. The Self-Clean feature will not operate whenever a radiant surface remains ON.
2. A Self-Clean cycle may be started if the appliance has the
Cooktop Lockout active. A Self-Clean cycle cannot be
started if
Oven Lockout feature is active.
f'""
vr
3. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly
cleaned. Once power is restored, set for another Self-Clean cycle to finish.
4. If your clock is set tor normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 13 for instructions to set the control for
the 24 hour time of day display mode.
33