Instructions, When the set bake time runs out, Press – Kenmore 790.9446 User Manual
Page 20: Display, E n d, Setting oven controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The BAKE Bake, COOK TIME (^) and DELAY STARl(i^ pads control the Delayed Timed Bake feature. The automatic
timer of the Delayed Timed Bake will turn the oven ON and OFF at the time you select in advance.
Setting Oven Controls
• Setting Delay Start (Delayed Timed Bake)
Setting Delay Start
INSTRUCTIONS
To program the oven for a Delay Start and to shut off
automatically {example for baking at 375°F for 50
minutes and starting at 5:30):
1. Be sure that the clock is set with the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
3.
Press (S) . (See Fig. 1).
4.
Enter the desired baking time using the number key pads by
pressing
(D®
(See Fig. 2). Note: Baking time may be set
for any amount of time from 1 minute to 11 hours and 59
minutes.
6
.
7.
8
9.
Press
(See Fig. 3).
Press (See Fig.4).
Enter the desired start time using the number key pads
@@(5) (See Fig. 5).
Press (See Fig.
6
).
Press Bake. (See Fig. 7).
10. Press
11. Press (See Fig.
8
)
Note: Once Delay Start has started, press (W) to display the bake
time remaining. Once the Delayed Timed Bake has started baking,
a long beep will sound when the oven temperature reaches the set
temperature.
Press when baking has finished or at any time to cancel the
Delay Start (Delayed Timed Bake) feature.
When the set bake time runs out:
1. "End" and the time of day will show in the display. The oven will
shut off automatically (Fig. 9).
2. The control will beep 3 times. The control will continue to beep
3 times every 30 seconds until (s) is pressed.
PRESS
Bake
DISPLAY
Fig. 4
Fig. 5
Fig. 6
Fig. 7
J U J / J
Fig. 8
iiO
E n d
Fig. 9
NOTE: If your clock is set for normal 12 hour display mode the
Delay Start (Delayed Timed Bake) feature can never be set
to start more than 12 hours in advance. To set the
Delay Start 12-24 hours in advance see page 13 for instructions to set
the control for the 24 hour time of day display mode.
20