Setting oven lockout feature, Instructions, To activate the oven lockout feature – Kenmore 790.9446 User Manual
Page 15: To reactivate normal oven operation, Press, Display, Setting oven controls, Instructions to activate the oven lockout feature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Oven Controls
•
Oven Lockout
•
Temperature Display
Setting Oven Lockout Feature
The (^) pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door, prevents the
Warmer Drawer and most oven controls from being turned ON. It does not disable the clock, Kitchen Timer or the interior
oven light.
INSTRUCTIONS
To activate the Oven Lockout feature:
1. Press and hold
(g)
for 3 seconds (Fig. 1).
2. After 3 seconds a beep will sound, LOG &
"DOOR LOCKED"
will flash in the display. Once the oven door is locked the
"DOOR LOCKED" indicator will stop flashing.
To reactivate normal oven operation:
1. Press and hold for 3 seconds. A beep will sound.
LOC will
clear. The
"DOOR LOCKED" will continue to flash until the oven
door has completely unlocked (See Fig. 2).
2. Theoven isagainfully operational.
^'
9-2
PRESS
S)for 3 seconds
S) for 3 seconds
DISPLAY
•DH I nr
■ D U L U L
Fig. 1
Setting Temperature Display — Fahrenheit or Celsius
The BROIL and
CLEAN
Clean
pads control the Fahrenheit or Celsius temperature display modes. The oven control can
be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in
Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:
1
.
To tell if the display is set for Fahrenheit or Celsius press
b
™
i
(Fig. 3) and hold for
7 seconds; "550°" will first appear in the
display and then a beep will sound. If
"F" appears, the display
is set to show temperatures in Fahrenheit (Fig. 4). If
"C"
appears, the display is set to show temperatures in Celsius
(Fig. 5).
2
.
Press ci£n to switch between Fahrenheit or Celsius display
modes. The display will show either
"F" (Fig. 4} or "C" (Fig. 5).
3. Press
to accept the change or press to reject the
change.
PRESS
M for 7seconds
or
DISPLAY
■ o n c c n °
J U J J U
Fig.3
Fig. 4
Fig. 5
15