Kenmore 790.9446 - Manual (Page 24)

Setting Oven Controls
• Setting Convection Convert Feature
• Setting Add 1 Minute Feature
To set the Convection Convert feature
The conmrt CONV CONVERT pad is used to automatically convert a standard baking recipe for convection baking. When set
properly, this feature is designed to display the actual converted (reduced) temperature in display.
Convection Convert MUST be used with a Convection Bake keypad. When used with a Timed Bake or a Delayed Timed
Bake setting, the Convection Convert feature will display a "CF" for check food when the bake time is 75% complete (See
Fig. 4). At this time the oven control will sound 3 long beeps at regular intervals until baking has finished. When the bake
PRESS
time has completely finished the control will display "End" and will sound 3 long beeps every 30 seconds until the (S) pad
is pressed (See Fig. 5).
INSTRUCTIONS
Using Convection Convert feature to adjust oven
temperature from a Bake recipe {example below
when setting oven for
350“F):
1. Arrange interior oven racks and place food in oven.
2. Press Bake , (See Fig. 1). If a Cook Time or a Delay Start is
desired, enter the times now.
3. Press . "CONV BAKE" and the oven set temperature
adjustment will appear in the display (for this example it is
325°F).
A beep will sound once the adjusted oven set
temperature is reached. (See Fig. 2).
Notes: When used with a Cook Time or a Delay Start setting,
the Convection Convert feature will display a "CF" for check food
when the bake time is 75% complete (See Fig. 3). At this time the
oven control will sound 3 long beeps at regular intervals until baking
has finished. When the bake time has completely finished the
control will display
"End" and will sound 3 long beeps every 30
seconds until the (s) pad is pressed (See Fig. 4).
DISPLAY
m m
Fig. 1
'IMJ z'c'b @
Fig. 2
m c F i¥l
Fig.3
m End
Fig. 4
The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating
(See Figs 2 or 3)
Press @ to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection
Convert feature with a Cook Time or a Delay Start function is
20 minutes.
To Set Add 1 Minute Feature
The add 1 MINUTE pad is used to set additional minutes to the Minute Timer. Each time the (^) pad is pressed, another
minute is added to the Minute Timer if the Minute Timer is already active. If the Minute Timer is not active and the (^) pad is
pressed, the Minute Timer feature will become active and will begin counting down from 1 minute.
When the Minute Timer reaches the end of the set time, the timer will display End’ and signal 3 long beeps at regular intervals
until (S) is pressed. If a Minute Timer function has ended pressing (S) will restart the timer at 1 minute. For further information
on how to set the Minute Timer feature see To Set the Minute Timer instructions.
24