Review installation, Final steps, Benefit – Kenmore 3950145 User Manual
Page 19: For your
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REVIEW INSTALLATION
for your
Benefit
Take a few minutes to complete
this checklist. It will help assure you
that you have a proper installation
and increase your satisfaction with
your Kenmore washer.
□ Check electrical requirements.
Be sure you have correct electrical
supply and recommended grounding
method.
□ Check that you have:
• All the tools you started with.
• Removed all packaging materials.
• Removed shipping strap with
three cotter pins.
• Installed all parts listed on
pages
6
-
8
.
□ Check that:
• The washer is level.
• The nuts on the front legs are tight.
□ Check that the water faucets are
turned on.
FINAL STEPS
□ Plug power supply cord into
grounded outlet.
□ Remove the blue protective film on
the console and any tape remaining
on washer.
□ Take a few minutes and read the
Operating instructions (pages 20-29)
to fully understand your new washer.
Then, start the washer and allow it
to complete the ULTRA CLEAN or
NORMAL Cycle.
19