Wands, Powermate – Kenmore 116.27514 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
Please pay special attention to these hazard alert boxes, and follow any instruc
tions given, WARNING statements alert you to such dangers as fire, electric
shock, burns and personal injury. CAUTION statements aiert you to such dangers
as personal injury and/or property damage.
..........................................................................-.... . ............................ ........................................................................................ ......................
1
1________
ASSEMBLY INSTRUCTIONS
A
warning
Electrical Shock Hazard
DO NOT plug into electrical supply until
assembly is complete. Failure to do so
could result in electrical shock or
injury.
Before assembling vacuum cleaner, check
the PACKING LIST on the cover of the
separate REPAIR PARTS LIST. Use this list
to verify that you have received all the
components of your new Kenmore vacuum
cleaner.
WANDS
Slide wands together
until wand button
snaps into place Turn
wand button to the
slotted area of the
wand swivel..
The swivel allows you
to turn the handle to
the left side to reach
farther under low fur
niture.
POWERMATE
1. Insert wands into
PowerMate until the
wand button snaps
into place,
2, Connect
Power^/late plug and
cord as shown. DO
NOT force. Raised
area of plug must be
toward hand
3. Secure card into the cord holder on the
wand swivel.
To remove; Step on wand quick release
pedal, then pull up on wands.
iJUtl
Í2I
•■ir