A warning, Exhaust filter hepa, Note: see parts and features for – Kenmore 116.27514 User Manual

Page 16: Warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EXHAUST FILTER CHANGING

WARNING

Fire and/or Electrical Shock Hazard

Do not operate with a clogged exhaust
filter or without the exhaust filter or

exhaust filter cover installed.

EXHAUST FILTER
HEPA

The exhaust filter cartridge must be
replaced when dirty Replace the filter when
the entire surface area is covered evenly.
The filter CANNOT be washed as it will
lose its dust trapping ability.

NOTE: See PARTS AND FEATURES for
Exhaust Filter number

1. Pull out and
up on the

exhaust filter
cover to remove
from the
canister and lay
aside.

2, Pul) the exhaust
filter up and out
from the rear of
the canister

3. Replace the
exhaust filter
cartridge

Place the new

filter into the
canister with
the foam seal
facing
towards the
canister

Exhaust
Fitter

4, Replace the

exhaust filter cover
by placing the two
tabs on the filter
cover into the slots
on the canister
and rotate into
place until it snaps
closed

This manual is related to the following products:

116.27515