Suggested pile height settings, Attachments on handle, Note – Kenmore 116.27514 User Manual

Page 11: Attachments on wands, Attachment, Usetable, Caution, Attachments

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SUGGESTED PILE HEIGHT SETTINGS

For best deep down cleaning, use the XLO

setting,, However, you may need to raise the

height to make some jobs easier, such as

scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from
shutting off. Suggested settings are:

HI - Shag, deep pile, or scatter rugs,

MED ~ Medium to deep pile.

LO “ Low to medium pile,

XLO ~ Most carpets and bare floors.

ATTACHMENTS

CAUTION

DO NOT attach or remove handle or

wands while vacuum cleaner is ON.
This couid cause sparking and damage
the electrical contacts.

ATTACHMENTS ON HANDLE

NOTE: If the
PowerMate is

attached, turn
vacuum cleaner
off before
removing handie

from wands,

1, Press handle

quick release
button and pull
up on handie

Handle

Lack

Button

Handle
Quick
Release

Upper
Wand

Slide attachments firmly

on handie as needed. See
ATTACHMENT USE

TABLE.

NOTE:

To assemble
dusting brush
Insert the fabric
brush into the
dusting brush
nozzle and press
into place.

Dusting

Brush

Fabric
Brush

To remove,
press latch
and lift out

Latch

ATTACHMENTS ON WANDS

1.To
remove

wands from

PowerMate,

lock wands
in straight-
up position.

Wand
Quick
Release

Pedal

2. Press wand quick
release pedal with foot
and pull the wands
straight up and out of
PowerMate.

The PowerMate plug
and cord do not have
to be removed to use
attachments on the

wands.

3. Put attach
ments on

wands as need

ed. See

ATTACHMENT

USETABLE-

This manual is related to the following products:

116.27515