Kenmore 1430 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONVERTING TO FREE-ARNI SEWING
Base Release Button
Fig. 1
Fig. 2
1. Remove the base from the machine 2. To replace the base, simply slide it
by pushing the release button (if
applicable) and pulling the base to
the left. (Fig. 1, 2)
along the free arm to its original
position. (Fig. 1)
Note: Base cannot be removed or
replaced unless shuttle cover is
closed.