Wheels and leg extenders to cart, 4pcs of m6 lock washers, 4pcs of m6 flat washers – Kenmore 146.1622201 User Manual
Page 15: Leg extender rear, Leg extender front, Axle rod, Leg extender rear leg extender front axle rod
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Wheels and Leg Extenders to Cart
□
Turn assembly upside down. Align the bottom shelf side holes with leg holes.
□
Attach sides of bottom shelf to four legs with (4)
IVI6x13 screws, IVI6 lock washers
and
IVI6 flat washers.
Fully tighten all shelf screws, top and bottom.
n Remove hitch pin, nut and washer from axle. Insert axle rod through a wheel, through both right leg
axle holes, and through other wheel.
□
Attach with (1)
Axle washer, nut
and
hitch pin.
Assemble wheels with “cone” side against legs.
□
Hammer leg extenders onto left legs.
The screws used in this step:
1. 4pcs of M6x13 screws:
2. 4pcs of M6 lock washers:
3. 4pcs of M6 flat washers:
Leg Extender Rear
Leg Extender Front
Axle Rod
640-01303702-3-58- 15