beautypg.com

Canister, Hood and tool storage cover, A cauhon – Kenmore 116.25812 User Manual

Page 8: Power-mate jr.® storage, Cauhon, Hose

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

CANISTER

1.

Open the canister hood

2. Check to see that the dust bag is proper­
ly installed. See BAG CHANGING for
instructions.

3. Check to see that the motor safety filter is
properly installed. See MOTOR SAFETY
FILTER CHANGING for instructions

HOOD AND TOOL

STORAGE COVER

it is normal for the canister hood and tool

storage cover to come off when opened fur­
ther than needed. Line up the hinge slots,
Insert the hinges into the slots, and cióse

the hood and tool storage cover to reinstall.

A

CAUHON

Never open canister hood with the tool
storage cover open. This will help to
prevent damage from occurring to the
canister hood and/or tool storage cover.

HOSE

1. Line up the hose
latch tab and notch
in canister hood
and insert hose
into canister until it

snaps in place-

To remove:

Lift

hose iatch tab
upward and pul! up

on hose.

Handt&

Hose
Latch

Tab

Notch

Lock
Button

Handte
Quick
i?eteas©x,

2, Insert handle
into wand until
lock button
snaps in place,

Be sure hose
is not twisted.

To remove:

Press handle
quick release
button and puli
up on handle,

To store:

Disconnect hose from wands and

canister to prevent stress on hose during

storage. Store hose in a loosely coiled

position so the hose covering is not
stressed.

POWER-MATE JR.® STORAGE

This canister is equipped with an on-board
storage area for a Power-Mate Jr. ®

attarhmpnt

(iri

ItCA Wt I r I lO I 11 -

To Install:

Open the Power-Mate Jr.® storage cover.

Insert the Power-Mate Jr®, press down into

place, and close the lid securely,

To Remove:

Open the storage cover. Remove Power­

Mate Jr.® from the storage area and use as

needed (see

ATTACHMENTS

and

attachment

use

TABLE).

Powar-Mata
Storage Cover