Exhaust filter changing, Warning, Exhaust filter hepa – Kenmore 116.25812 User Manual

Page 17: Power-mate® care

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EXHAUST FILTER CHANGING

.WARNING

Fire ancf/or Electrical Shock Hazard

Do not operate with a clogged exhaust

filter or without the exhaust filter or
exhaust filter cover installed.

EXHAUST FILTER
HEPA

The exhaust filter cartridge must be
replaced when dirty. Replace the filler when
the entire surface area Is covered evenly

The filter CANNOT be washed as it will
lose its dust trapping ability.

NOTE:

See

PARTS AND FEATURES

for

Exhaust Filer number,

1. Pull out and
up on the

exhaust fiiter
cover to remove

from the
canister and lay
aside.

Exhaust
Filter

3. Replace the
exhaust fiiter
cartridge. Place
the new filter Into
the canister with
the

foam seal

facing towards
the canister.

2. Pul! the exhaust
filter up and out
from the rear of
fhp caniiitpr

M I w MCii I to I -

, LiU’ J

ExhautiMärz&m
Fiiter

I' |Ä' 'I

i'fe'l

4. Replace the
exhaust filter cover
by placing the two

tabs on the filter
cover into the slots
on the canister and
rotate into place until
it snaps closed

Tabs

POWER-MATE® CARE

Always follow all safety precautions when performing maintenance to the Power-Mate®

.WARNING

Electrical Shock Or Personal Injury Hazard

Disconnect eiectricai supply before performing maintenance to the vacuum cleaner.
Failure to do so could result tn electrical shock or personal injury from vacuum cleaner

suddenly starting.