Light bulb changing, Agitator servicing, Warning – Kenmore 116.25812 User Manual
Page 20: To check the brushes, To replace agitator assembly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LIGHT BULB CHANGING
1. Remove Power^Mate® cover as shown in
BELT CHANGING AND AGITATOR
CLEANING
section-
2, Push in and turn
buib counterclock
wise, then pull out
to remove-
3, Push in and turn
bulb clockwise, to
replace. Bulb must
not be higher than
15Watts(l30Volts).
4. Reinstall Power-Mate® cover as shown in
BELT CHANGING AND AGITATOR
CLEANING
section,
NOTE:
See
PARTS AND FEATURES
for
bulb number.
AGITATOR SERVICING
WARNING
Electrical Shock Or Persona! Injury
Hazard
Disconnect electrical supply before per
forming maintenance to the vacuum
cleaner. Failure to do so could result In
electrical shock or persona! injury from
vacuum cleaner suddenly starting.
TO CHECK THE BRUSHES
Base Support Bsrs
When brushes
are worn to the
level of the base
support bars,
replace the
agitator
assembly.
TO REPLACE AGITATOR
ASSEMBLY
1. Remove Power-Mate* cover, belt and
agitator assembly. See "To Remove Beit" in
BELT CHANGING AND AGITATOR
CLEANING
2. Repiace agitator assembly.
3. Reinstall belt and Power-Mate® cover
See “To replace belt" in
BELT CHANGING
AND AGITATOR CLEANING
20