Suggested pile height settings, Attachments, Attachments on handle – Kenmore 116.25812 User Manual

Page 11: Attachments on wand, P aijtinm

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SUGGESTED PILE HEIGHT SETTINGS

For best deep down cleaning, use the

XLO

setting. However, you may need to raise the
height to make some jobs easier, such as
scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from
shutting off. Suggested settings are:

Hi Shag, deep pile, or scatter rugs

MED - Medium to deep pile.

LO - Low to medium pile,

XLO

- Most carpets and bare floors.

ATTACHMENTS

P AIJTinM

wAU I lUi^

DO NOT attach or remove handle or

wands while vacuum cleaner is ON.
This could cause sparking and damage
the electrical contacts.

ATTACHMENTS ON HANDLE

NOTE: If the
Power-Mate® is

attached, turn

vacuum cleaner
off before

removing handle

from wands.

1. Press handle
quick release
button and pui!
up on handle.

Lock
Button

HandlB
Quick
Release-

NOTE:

To assemble
dusting brush
insert the fabric
brush into the
dusting brush
nozzle and press
into place.

2. Slide attachments

firmly on handle as
needed See

ATTACH

MENT USE TABLE.

Dusting

Brush

To remove,

press latch

and lift out.

■fpj '

fei;

ATTACHMENTS ON WAND

I.To
remove

wand from

Power

Mate®, lock

wand in
straight-up
position

Wand
Quick

Release
Pedal

2* Press wand quick

release pedal with foot

and puli the wand
straight up and out of
Power-Mate®.

3. Put attach
ments on wand
as needed. See

ATTACHMENT
USE TABLE