beautypg.com

Motor safety filter changing, Warning, Motor safety filter electrostatic – Kenmore 116.25812 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

MOTOR SAFETY FILTER CHANGING

WARNING

Electrical Shock Hazard

Unplug power cord from electrical

outlet. Do not operate the vacuum
cleaner without the motor safety filter.
Be sure the filter is dry and properly
installed to prevent motor failure and/or
electrical shock.

MOTOR SAFETY FILTER
ELECTROSTATIC

This filter must be replaced when dirty, li
should be replaced regularly depending on
use conditions.

The filter CANNOT be

washed as it wifi lose its dust trapping
ability.

NOTE:

See

PARTS AND FEATURES for

Motor Safety Filter number.

1.

Remove the bag as outlined in the

BAG

CHANGING

section

2. Lift the rubber

retainer and pull out

motor safety filter as
shown.

3, Replace the filter,

white side out,

facing

the dust bag, by sliding
it back into place under
the ribs in the bag
cavity. Tuck filter in so
that it fits completely
under the rubber
retainer.

4, Replace the bag as outlined in the BAG

CHANGING section

16