Electronic touch control – Kenmore 116.22822 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ELECTRONIC TOUCH CONTROL
CARPET High - turns on both the canister
and the Power-Mate* motors for HIGH
power and cleaning of most carpets.
In order to get MEDIUM or LOW power level
for carpet cleaning, you must press CAR
PET High button first, then press the
desired lower power level,
BARE FLOOR High - turns on the canister
motor only for HIGH power and cleaning of
bare floors.
Power Level MEDIUM - reduces the power
of the canister motor only to the MEDIUM
level for attachment cleaning of upholstery.
Power Level LOW - reduces the power of
the canister motor only to the LOW level for
attachment cleaning of curtains, blinds, etc.
OFF “ turns off canister and Power-Mate*
motors.
NOTE - When the BARE FLOOR High but
ton is pressed, the headlight DOES NOT
function since no electricity flows to the
Power-Mate*.
NOTE - When using Power-Mate Jr.* the
vacuum must be started in CARPET High
position, then reduce the power ievel as
necessary.