Kenmore 116.22822 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Always empty the dust bin when dirt
level reaches the “MAXIMUM FILL" line.
TO REMOVE OUST BIN;
Press down on
the dust bin
release tab locat
ed above the
handle of the dust
bin.
Puli the handle
and lift dust bin
out of the vacu
um cleaner.
Every time dust bin is
removed, rotate
cleaning knob on top
of dust bln at least
two complete revolu
tions to dean filter
and maintain clean
ing performance.
TO EMPTY OUST BIN;
While holding dust bin
over a b'ash
container, remove lid
from dust bin by lifting
off.
TO CLEAN FILTER
See To Clean Filter" under FILTER
CHANGING/CLEANING.
Filter
^ Cover
Filter
Secondary
Filter
Dust Bin
Port
Before
replacing the
dust bin,
remove any
clogs that might be
located in
the dust bin port or the
secondary filter.
TO REPLACE DUSTBIN
Replace dust bin
lid assembly by
placing back on
dust bin with the
aiignment rib on
the lid aligned
with the edge on
the dust bin
Alignment
rib
Place dust bin
back into vacuum
cleaner by insert
ing until the
dust bin release
button locks
dust
bin secure*
fy in place.
14