Warning – Kenmore 116.22822 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1. Remove Power-Male® cover as shown in
BELT CHANGING AND AGITATOR CLEAN
ING section.

2. Push in and turn
bulb counterclock
wise, then pull out
to remove.

3. To replace bulb,

push in and turn new
bulb clockwise. Bulb
must not be higher
than 15Watts(130
Volts).

4. Reinstall Power-Mate cover as shown in
BELT CHANGING AND AGITATOR
CLEANING section.

NOTE: See PARTS AND FEATURES

for the bulb number

WARNING

Electrical Shock Or Personal Injury
Hazard

Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec
trical shock or personal injury from
cleaner suddenly starting.

TO CHECK BRUSHES

Base Support Bars

When brushes
are worn to the

level of the base
support bars,
replace the
agitator.

TO REPLACE AGITATOR
ASSEMBLY

1. Remove Power-Mate®Vx)ver, agitator

cover, belt and agitator assembly. See “To
Remove Belt" in BELT CHANGING AND
AGITATOR CLEANING.

2. Replace agitator assembly.

3. Reinstall belt, agitator assembly, agitator

cover and Power-Mate® cover. See “To

replace belf in BELT CHANGING AND
AGITATOR CLEANING.

This manual is related to the following products:

116.22823