Caution, Warning, Ecl^cliànging'àno’kci'm^ clsani – Kenmore 116.22822 User Manual
Page 17: Exploded view agitator assembly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Always follow all safety precautions when
cleaning and servicing the Power-Mate*’.
A
CAUTION
When you remove the end caps, a
small metal washer on each end
may come off. DO NOT lose these
two metal washers.
A
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result In elec
trical shock or personal injury from
cleaner suddenly starting.
eCl^ClIÀNGING'ÀNO’KCI'm^ CLSANi
TO CLEAN AGITATOR:
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacuum,
the agitator must be cleaned every time the
belt is changed.
The agitator must also be cleaned according
to the following schedule:
Vacuum Use
HEAVY -
(used daily)
MODERATE -
(used 2-3 times/week)
LIGHT-
(used 1 time/week)
Clean Agitator
every week
every month
every 2 months
Disconnect cleaner from electrical outlet.
Check and remove hair, string and lint build
up frequently from the Power-Mate® agitator
and end cap areas. If build-up becomes
excessive, disconnect Power-Mate® from
wand and follow the steps below.
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris locat
ed on the agitator or end caps.
Exploded View
Agitator Assembly
Brush Unit
-End Cap
1
-Balt Pulley
17