beautypg.com

Carpet cleaning, Carpet cleaning -12, Before cleaning – Kenmore 114.85925 User Manual

Page 11: Fill

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Insert tiew nozzle by pushing securely

into Nozzle Lock,

NOTE:

Make sure

nozzle is inserted all the way in the

Nozzle Lock, otherwise Nozzle Lock will

not secure properly. Failure to install
nozzle correctly can impact cleaning
performance.

Turn Nozzle Lock Tab

clockwise to lock
nozzle onto cleaner.

LOCK TAB

s s

i

CARPET CLEANING

IMPORTANT:

For best cleaning results

use a steady, forward and backward
motion. Wet cleaning should be done at
half the speed of dry vacuuming. For
heavily soiled areas, repeat if necessary.

BEFORE CLEANING:

• Vacuum carpet thoroughly with a regular

vacuum cleaner.

• Remove as much furniture from the

room as possible. If unable to remove
the furniture, place plastic or foil under
and around the legs until the carpet has
dried completely.

■ Check for color fastness. Dampen a

white cloth with solution. Test a small
area in an inconspicuous place. Gently
rub the cloth over the area. Check each
color for bleeding. If the cloth remains
clean, it should be safe to shampoo the
carpet.

IMPORTANT:

Make sure to use the green

carpet nozzle and Kenmore® Carpet &
Upholstery Concentrate Cleaner when
operating as a carpet shampooer. See
page 10 for instructions on changing
nozzles.

CAUTION:

Do not use the cleaner to dry

vacuum carpets; this could damage
appliance.

FILL

Remove Tank-in­

Tank™ System from

cleaner by pushing
down on tank latch
and tilting out.

Remove measure cap
from the rear of the
Clean Water Tank.

Pour 2 capfuls of
Kenmore® Carpet &

Upholstery
Concentrate Cleaner
into Clean Water Tank.

11