Kenmore 796.4027 - Manual (Page 13)

HOW TO USE
OPERATING THE WASHER
0 SORT LAUNDRY AND LOAD WASHER
Refer to page 15.
POWER
ADD DETERGENT AND OTHER PRODUCTS
Open the dispenser drawer and add ® detergent to the main wash
compartment in the dispenser drawer. Add bleach and fabric softener as
desired. See pages 16 and 17 for important information on detergents and
dispenser use.
Q
TURN ON THE WASHER
Press the POWER button to turn on the washer. The lights around the Cycle
Selector Knob will illuminate and a chime will sound, if turned on. Refer to
page 12.
I
CO
_i
O
z
LU
iiL 0 SELECT A CYCLE
■■
Turn the Cycle Selector Knob either direction to select the desired cycle. The
preset Wash/Rinse Temperature, Spin Speed, Soil Level, and Option settings
for that cycle will be shown. Refer to page 12.
£>n Hlovy ■i™
1
HmltjM J h I s I.
1 ‘
_ Nwrnol ! Soft
1
1 ' 1 ‘
QM/QM “No Spin ¡Light !»
I Spin S) 1 IW<< I Ml L«wl I CM»» j
SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be changed if desired. This
can be done using the cycle modifier buttons as shown on page 19
(Wash/Rinse, Spin Speed, Soil Level, and Chime).
NOTE: To protect your fabrics, not all modifiers are available on all cycles.
O
Stflin Treat
O
2’’^ Rini©
O
O
Stai
O
O.
0 SELECT CYCLE OPTIONS
Cycle options can also be added using the options buttons as shown on page
20 (Stain Treat, 2nd Rinse, Control Lock, and Delay Start).
NOTE: Not all options are available on all cycles.
®
START/PAUSE
BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. Once the cycle has been
started, pressing the START/PAUSE again will pause the washer and retain
the existing settings for up to 4 minutes.
1 3