beautypg.com

Heavy duty, Normal / casual, Spin only – Kenmore 110.2953* User Manual

Page 6: Tiiillesiiitiig - sliils aii lems, Delicate, 2nd rinse, Rinse & spin, Service...check

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Jormal / Ca

Normal /

Regular

— Express

A

Heavy Duty

Use this cycle for cottons and linens used regularly. For
maximum soil removal, you should set the Cycle Selector
(Timer) Control for the longest available time.

Normal / Casual

Select this cycle for synthetic fabrics such as dress shirts,
blouses, and slacks, the cycle will give you a load-cooling
spray rinse to reduce wrinkling.

Delicate

This cycle combines slow-speed agitation and slow-speed
spin to gently clean garments while reducing wrinkles.

2nd Rinse

A second rinse can be used to aid in improved removal of
detergent or bleach residue from garments. This option may be
automatically added to the wash cycle by setting the

OPTIONS

Control to 2nd Rinse anytime before the end of the cycle.

Rinse & Spin

Select this option if you think an extra rinse is needed. Set
OPTIONS Control (if available) to One Rinse. You should then
set the Cycle Selector (Timer) Control knob to a Rinse setting.

Spin Only

A drain and spin may help shorten drying times for some fabrics
by removing excess water. Set OPTIONS Control (If available)
to One Rinse. You should then set Cycle Selector (Timer)
Control to a Spin setting.

TiiilLESiiiTIIG - SliilS aii LEMS

Before you call

service...check

for the following.

Loud clicking and banging?

• The yellow shipping strap may still be in the rear of the

washer. Completely remove the yellow shipping strap.

• The washer should be level, and the feet should be firmly

on the floor.

Some sounds are normal but may be different from
those of your previous washer.

• The gears engaging after the drain and before the spin.
• The sound of air being pulled through the pump after most

of the water has drained.

Is the washer leaking?

• Fill hose connections are tight

• Gaskets in fill hose are tight and flat

• Drain hose clamp is securely attached

• Faucets, drain/standpipe, or laundry tub is not leaking

• The washer tub is centered, and the load evenly balanced

at the start of each load

• The washer is level

• The front feet are installed, and the nuts are tightened

to the cabinet

W1CM26672Â

© 2008 Sears Brands, LLC.

® Registered Trademark / ™ Trademark / Service Mark of

Sears Brands, LLC, used under iicensee by Sears Canada Inc.

7/08

Printed in U.S.A.

This manual is related to the following products: