B. remove shipping strap, For your benefit, Benefit – Kenmore 3950144 User Manual

Page 13: Pull, For your

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

B. REMOVE SHIPPING STRAP

for your

Benefit

Removing the shipping strap is
necessary for smooth operation.
If the shipping strap is not
removed, the washer will make

excessive

noise.

To prevent floor damage, set washer onto

cardboard before moving across floor.

Move washer close to its final location.

STEP

1. Read, then remove the label

over the electrical plug and shipping strap.

STEP 2.

Puli the yellow shipping strap

completely out of the washer. There
should be three cotter pins on the end
of the shipping strap when it is pulled
out of the washer. The electrical plug is
attached to this shipping strap.

STEP 3.

Pull firmly to remove the

end of the shipping strap that remains
pinned to the back of the washer. This

will release the rear self-leveling legs.

PULL

Electrical plug

STEP 4.

Cut the shipping strap about

16 inches from plug end. Look for the

words “CUT HERE.” Discard end with

three cotter pins.

Slide remainder of

shipping strap from the electrical

plug.

You will use this to secure the

drain hose.