beautypg.com

Baking problems and solutions, Baking problems, Causes – Kenmore ELITE 790.367 User Manual

Page 23: Corrections, Cakes too dark on top or bottom, Cakes not done in the center, Cakes not level, Setting oven controls (confd), Baking

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

For best results, preheat the oven before baking cookies, breads, cakes, pies or pastries, etc. There is no need to
preheat the oven for roasting meat or baking casseroles.

The cooking times and temperatures needed to bake a product may vary slightly from your previously owned
appliance. Referto

“Adjusting the Oven Temperature”

section.

Setting Oven Controls (confd)

Oven

Baking

Information

Baking problems and solutions

Baking Problems

Causes

Corrections

Cookies and
biscuits burn on
the bottom.

Cookies and biscuits put into
the oven before the preheating
time is completed.
Oven rack overcrowded.

Dark pan absorbs heat too fast.

Allow oven to preheat to the selected temperature
before placing food in oven.
Choose pan sizes that will permit 2" to 4" (5.1 cm to

10.2 cm) of air space on all sides when placed in the

oven.

Use a medium-weight aluminum baking sheet.

Cakes too dark on
top or bottom.

Cakes put into the oven before
preheating time is completed.
Oven rack position too high or
low.
Oven too hot.

Allow oven to preheat to the selected temperature
before placing food in the oven.

Use proper rack position for baking needs.

Set oven temperature 25°F/12°C lower than
recommended.

Cakes not done in
the center.

• Oven too hot.

• Incorrect pan size.
• Pan not centered in the oven.

Set oven temperature 25°F/12°C lower than
recommended.
Use pan size suggested in recipe.
Use proper rack position and place pan so there is 2"
to 4" (5.1 cm to 10.2 cm) of space on all sides of pan.

Cakes not level.

• Range not level.

• Pan too close to oven wall or

rack overcrowded.

• Pan warped.

Place marked glass measuring cup filled with water

on the center of the oven rack. If water level is
uneven, refer to the installation instructions tor
leveling the appliance.

Be sure to allow 2" to 4" (5.1 cm to 10.2 cm) of

clearance on all sides of each pan in the oven.

Do not use pans that are dented or warped.

Foods not done

when cooking time
is up.

Oven too cool.

Oven overcrowded.
Oven door opened too
frequently.

Set oven temperature 25°F /12°C higher than
suggested and bake for the recommended time.
Be sure to remove all pans from the oven except the
ones to be used for baking.
Open oven door only after shortest recommended
baking time.

23

This manual is related to the following products: