Kenmore Elite 79575559400 - Manual (Page 23)

USING YOUR REFRIGERATOR
WATER FILTER
It is recommended that you replace the filter when the
water filter indicator light turns on or your water dispenser
or ice maker performance decreases noticeably.
2. Replace with a new cartridge.
Take the new cartridge out of its packaging and remove
protective cover from the o-rings.
With cartridge knob in the vertical position, push the new
filter cartridge into the cover until it stops.
After changing the water filter cartridge, reset the water
filter status display and indicator light by pressing and
holding the button for 3 seconds.
1. Remove the old cartridge.
If you are replacing the cartridge, first remove the old
one. Open the cartridge cover by pressing in on the tab
(1) at the front and pulling down (2).
If you can’t turn the filter from side to side, it isn’t fully
inserted. Push it in firmly and use its handle to twist the
cartridge clockwise about 1/4 turn. You will hear a snap
when it clicks into place.
Rotate the knob of the cartridge counter clockwise until it
clicks forward.
3. Flushing the Water System After Replacing Filter
Dispense water through the water dispenser for 3 minutes
to purge the system.
To order a replacement water filter call 1-800-4-MY-
HOME®. Ask for part number 5231JA2006B.
Pull out the cartridge.
NOTE: There will be water in the cartridge. Some spilling
may occur.
23