Crispers with rails to remove crisper, Crisper cover with lattice on inner surface, To remove lattice – Kenmore Elite 79575559400 User Manual

Page 19: To replace crisper, To replace lattice, Using your refrigerator

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USING YOUR REFRIGERATOR

► Crispers with rails
To remove crisper:
1. Pull drawer out to full extension.
2. Lift the front of basket up and pull straight out.

CRISPER COVER WITH LATTICE ON INNER
SURFACE

WARNING: Be careful when handling glass cover since
glass is not attached to cover.

To remove lattice:

1. Be sure glass cover is removed.

2. Turn the cover frame over. Each lattice has its own

frame within the cover frame.

3. Pull left and right sides of lattice frame outward to

release lattice tabs from frame. Remove lattice.

To replace crisper:

1. Push rails to the back of the compartment.

2. Insert the back corner of the basket into frame.

To replace lattice:

1. Pull sides of each lattice frame outward to re-insert

tabs of lattice into frame.

2. Slide the cover frame back into refrigerator and

securely onto frame support.

3. Place the glass cover back onto top of cover frame.

3. Slightly tilt up the front and push back until it snaps into

place.