Kenmore 911.46565 - Manual (Page 20)

t€^nm€ßr&
CARE AND GLEAMING
Self-Cleaning Cycle
TO SETA CLEAN CYCLE
The plean Cycle, ihcluding cooldown
time, is automatically set for 4 hours,
but you may change this from 3 hours
if oven is lightly soiled, up to 5 hours if
oven is heavily soiled
CLEAN
START
TO STOP A CLEAN CYCLE
Simply press thè
You wiJTneed to wait for the oven
terriperature to drop below the lock
temperature (approx. 1 hour) before
attempting to open the door.
' Press, th e .,0LpAN. ■ '
pad. 4 hours will show
In the display.
if you want to change
the length of clean time
press theWP and/or
DOVIIIN arrow pad.
"Pressthe'"""''' ..
START pad
After the cycle, you rhay ndtice sditie
white ash in the Oven. Just vvipe it up
with a damp cloth or sponge.
If \yhite spots retTiain, scrub thenri
vyifh a spapdilled steel woo
sure to rinse thoroughly. These are
usually deposits of Salt that Cdnnot
be removed during the cycle.
If for any reason you are not
satisfied with the cleaning
results. Just, repeat '.the^cycle.
TO SET A
DELAYED START CYCLE
1. Latch the door handle,
2- Press the CLEAN pad,
3. If you want to change
the length of clean time
press the UP and/or
P^WN errow^^p
4. Press the DELAY
START TIME pad.
DELAY
START
У TIME
J
START
i. Press the UP and/or
DOWN arrow pads to
set the time you prefer
the clean cycle to start.
6. Press the START pad.
20